Prepared Society Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
350 Posts
Since I do have a wind generator, I can tell you that you are not going to get it to work. Most wind gennie's have to turn at least 150mph before they even cut in. Once they cut in , then they will only produce 1 -2 amps unless the wind kicks up. Wind gennies are never a good source for total power, as they are too variable according to the wind. Speed on the other hand, on your generator is critical to operate at correct voltage and Htz. Anything more then a + or - of about 2 hertz from 60 htz will destoy motors , like in refers etc.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top